Sunday, May 12, 2013

Ribbon Organizer Tutorial


1. Cut 6 pieces from the Stampin' Up! Petite Pocket Bigz XL.
  
2. On all 6 die-cuts cut off lower portion of the bottom flap c, about 1 ½” below crease line.

 
3. Cut off side flap a from piece 2 - 6 of the die-cuts.


4. On die-cut #1 cut side flap a according to picture.


 
5. On die-cut # 6 cut two slits in side flap 6d according to picture.
 
6. Fold all crease lines.

7. Apply glue in flap d of pieces 1 - 5.









 
 
 
8. Attach piece 2 to flap1d, 3 to 2d, 4 to 3d, 5 to 4d and 6 to 5d.
 
 
 
 
 
 
 
 
 
 
 
 
 
 
9.Roll into an evenly shaped hexagon and insert two flaps on 1a into slits on 6d.
  
 
 
   
10. Apply glue to the corners of the flaps b and c marked with the black dot in the picture on pieces 3 – 6.
 
 
11. Fold over flaps on both sides of the ribbon organizer and glue together.


















12. Cover up the holes on the sides that stay open in the middle (for example with punched or die cut circles or flowers).
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

 
 

 
13. Punch holes for ribbon on flap 1 with circle punch of the Itty Bitty Punch Pack. Cut off corners of flap 1b and 1c in angle so the organizer is easier to close.
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
14. Insert ribbon and close organizer. 


2 comments:

  1. THANK you so very very much for your so detailled tutorial!!! I´ll try it as well!!!

    ReplyDelete
  2. Thank you so much for taking the TIME to make this tutorial!!! Great job! Love all the photos! I can't wait to try this...
    Thanks for sharing!
    Sherry

    ReplyDelete

Follow me on Instagram

This blog has been my window to the world to showcase my artwork ever since I started my creative journey. In recent years Instagram has gai...